Glueless clamps for telenox carbon fiber metal detecting shafts

Detecting Innovations Glueless Clamp Set with Tools for Tele-Knox Shafts

SKU: D2-001
Sale price
$20.99
Regular price
$26.99
You save
$6 (23%)
Taxes and shipping calculated at checkout

Frequently Bought Together

Product Information

Our new Tele-Knox glueless shaft Clamps are now fitted to all new shafts.

To change clamps on old style Tele-Knox simply gently heat up the old glued clamps with a hot air gun or similar for 20-30 seconds until the glue melts then remove them with a pair of grips ( be careful very hot).


No need to clean all the old glue off the shaft only the flaky bits. The rest will help to stop the new clamps moving.


Put the two clamps on and join the three rods in the open position before you tighten them. Position the open part of the clamp where you can see the screw over the anti rotational channel and just tighten the allan key until you have no sideways movement. Tighten the other finger screw purely enough to stop the rods movement up and down. Please do not over-tighten either screws. This led to the problems on the old shafts where people inadvertently cracked the rods underneath causing uncontrolled slippage.

Specifications:

  • Replacement Glueless shaft clamps for Detecting Innovations Tele-Knox Shafts

Compatible:

  • Detecting Innovations Tele-Knox Shafts
Ask a Question

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Martin b.
Glueless telenox clamp set

Strong structure clamps tight on the shaft sleek appearance

Recommended for You