Minelab Gold Monster 1000 Metal Detector with Pro-Find 35 Pointer and Free Gear
Up until now, there has always been a compromise between frequency and sensitivity when optimizing detector performance, because lower frequencies are more sensitive to larger gold nuggets and higher frequencies are more sensitive to smaller gold nuggets. When comparing detectors, the three curves in the diagram represent each detector’s ability to find small gold nuggets of a certain size, at a maximum possible depth. Most detectors will find a very large nugget just beneath the surface, however a detector’s sensitivity to gold determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.
An 18 kHz detector will normally have a depth advantage on nuggets ≥ 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on nuggets ≤ 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.
The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the perfect choice to maximize your gold recovery!
GOLD MONSTER 1000 outperforms all other single frequency VLF gold detectors! Detector sensitivity comparisons are representative only. Actual performance will depend upon nugget size, detector settings and ground conditions.
"I found my first nugget within an hour; funnily enough it was in a detector scrape from previous excursions. All up I found many pieces of gold, the deepest being 3 inches in variable hot ground."
Jonathan Porter - Professional Gold Prospector, Australia- “I was able to find nine small nuggets (flakes) so easily that it was a bit surprising! Total weight of all nine is 7.8 grains. None were deep, maybe 3–4 cm at most. Just enough however to be just out of reach of the SDC and too small for the GPZ.”
Features and benefits:
- Fully automatic operation
- Extra sensitive 45 kHz VLF performance
- Highly adaptable 2 search coils included
- Rechargeable battery included
- Easy quick start
- Easy-to-use controls
- Gold chance indicator
- Multiple detect modes
- Gold (iron reject)
- Deep all-metal
- Sensitivity options
- Manual sensitivity, and two auto options; Auto, and Auto+
- Adjustable volume; adjust to suit your hearing, with 6 volume levels
- Highly adaptable
- Wide ground coverage
- Confined space detecting
- Universal shaft adaptability
- Waterproof coil (to 1m/3')
- Rain proof control box
- Automatic noise cancel
- Digital electronics
- Auto ground balance
- Faster processor
- Automatic sensitivity
2 search coils included
- GM 10 (10″ x 6″ Double-D) Search Coil
- GM 05 (5″ Double‑D) Search Coil
I’m still learning how to work with this but I tested it with precious metal I got sound to tell me the difference I tested head within in clousure
In all all the parts were sent work for what u need plus starting with this leads to bigger and better
The monster 1000 is super easy to operate. And it sure finds the nuggets!