Minelab Gold Monster 1000 Metal Detector, Additional Li Ion Battery, with Extra FREE Gear
Up until now, there has always been a compromise between frequency and sensitivity when optimizing detector performance, because lower frequencies are more sensitive to larger gold nuggets and higher frequencies are more sensitive to smaller gold nuggets. When comparing detectors, the three curves in the diagram represent each detector’s ability to find small gold nuggets of a certain size, at a maximum possible depth. Most detectors will find a very large nugget just beneath the surface, however a detector’s sensitivity to gold determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.
An 18 kHz detector will normally have a depth advantage on nuggets ≥ 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on nuggets ≤ 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.
The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the perfect choice to maximize your gold recovery!
GOLD MONSTER 1000 outperforms all other single frequency VLF gold detectors! Detector sensitivity comparisons are representative only. Actual performance will depend upon nugget size, detector settings and ground conditions.
"I found my first nugget within an hour; funnily enough it was in a detector scrape from previous excursions. All up I found many pieces of gold, the deepest being 3 inches in variable hot ground."
Jonathan Porter - Professional Gold Prospector, Australia- “I was able to find nine small nuggets (flakes) so easily that it was a bit surprising! Total weight of all nine is 7.8 grains. None were deep, maybe 3–4 cm at most. Just enough however to be just out of reach of the SDC and too small for the GPZ.”
Features and benefits:
- Fully automatic operation
- Extra sensitive 45 kHz VLF performance
- Highly adaptable 2 search coils included
- Easy quick start
- Easy-to-use controls
- Gold chance indicator
- Multiple detect modes
- Gold (iron reject)
- Deep all-metal
- Sensitivity options
- Manual sensitivity, and two auto options; Auto, and Auto+
- Adjustable volume; adjust to suit your hearing, with 6 volume levels
- Highly adaptable
- Wide ground coverage
- Confined space detecting
- Universal shaft adaptability
- Waterproof coil (to 1m/3')
- Rain proof control box
- Automatic noise cancel
- Digital electronics
- Auto ground balance
- Faster processor
- Automatic sensitivity
2 search coils included
- GM 10 (10″ x 6″ Double-D) Search Coil
- GM 05 (5″ Double‑D) Search Coil
High Plains Prospectors had the Minelab gold Monster 1000 on a holiday special. I had a few questions before ordering so I gave them a call. Their customer service was awesome answered all my questions. I received the detector within a few days. The extra gear that came with the detector was great. I would definitely do business with them again. This detector is easy to set up and the 5-inch coil will find small pieces of gold. There is a learning curve but once you get it figured out. This thing is great.
Have use only in back yard, have find many Brass shell casings and iron objects.
located a .22 short case at about 5 inches deep, believe my spring trip out west will locate some Shiny nuggets.
Finds everything! Down to the smallest of bits. Super sensitive detector. Quick shipping from High Plains.