Minelab Gold Monster 1000 Metal Detector
Up until now, there has always been a compromise between frequency and sensitivity when optimizing detector performance, because lower frequencies are more sensitive to larger gold nuggets and higher frequencies are more sensitive to smaller gold nuggets. When comparing detectors, the three curves in the diagram represent each detector’s ability to find small gold nuggets of a certain size, at a maximum possible depth. Most detectors will find a very large nugget just beneath the surface, however a detector’s sensitivity to gold determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.
An 18 kHz detector will normally have a depth advantage on nuggets ≥ 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on nuggets ≤ 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.
The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the perfect choice to maximize your gold recovery!
GOLD MONSTER 1000 outperforms all other single frequency VLF gold detectors! Detector sensitivity comparisons are representative only. Actual performance will depend upon nugget size, detector settings and ground conditions.
"I found my first nugget within an hour; funnily enough it was in a detector scrape from previous excursions. All up I found many pieces of gold, the deepest being 3 inches in variable hot ground."
Jonathan Porter - Professional Gold Prospector, Australia- “I was able to find nine small nuggets (flakes) so easily that it was a bit surprising! Total weight of all nine is 7.8 grains. None were deep, maybe 3–4 cm at most. Just enough however to be just out of reach of the SDC and too small for the GPZ.”
Features and benefits:
- Fully automatic operation
- Extra sensitive 45 kHz VLF performance
- Highly adaptable 2 search coils included
- Rechargeable battery included
- Easy quick start
- Easy-to-use controls
- Gold chance indicator
- Multiple detect modes
- Gold (iron reject)
- Deep all-metal
- Sensitivity options
- Manual sensitivity, and two auto options; Auto, and Auto+
- Adjustable volume; adjust to suit your hearing, with 6 volume levels
- Highly adaptable
- Wide ground coverage
- Confined space detecting
- Universal shaft adaptability
- Waterproof coil (to 1m/3')
- Rain proof control box
- Automatic noise cancel
- Digital electronics
- Auto ground balance
- Faster processor
- Automatic sensitivity
We recently purchased some land with a small creek on it. My husband thought I needed a new detector since my White Coinmaster 5000/D is 40 yrs old (but still works good). After much research, we decided on Minelab's Gold Monster 1000. We were very pleased with how quickly it arrived! It is easy to assemble, operate, and carry. It comes with two waterproof coils. Awesome! After watching many Yt videos, we took it to the proprty. I discovered that I needed to watch them again only because I wasn't expecting a carpet of "hot rocks" and couldn't remember how to cancel the noise. I found no gold that trip because of the rocks but had fun starting the adventure and learning process. It's a gold mining area so there is gold near by. I hope to find some but if not, I'll have the "fun of the hunt" cleaning up old metal on 40 acres. Thank you for a well built detector and for hours of entertainment as my Minelab and I become best friends.
Its still in box, havent had time to open it yet....sorry