High Plains Nugget Sucker Hand Held Suction Dredge

Made by gold prospectors for gold prospectors, this hand operated gold dredge (sometimes called a gold sniper) is made of 2 inch PVC pipe The Ball-handle is made High Density plastic. The 1" x 8.5" nozzle is perfect for crevicing and sniping. Total length is about 39 inches. The vacuum chamber is 2" x 25" inches and the total weight of the unit is only 2 pounds. The non-motorized suction dredge makes it perfect for places where you cannot use motorized dredges (check local laws). Narrow nozzle allows you to get deep inside cracks in bedrock to get told that was previously out of reach.

Please note:  If the nugget sucker loses suction or is too difficult to operate, you may need to tighten the wing nut inside the suction chamber.  To do this, simply pull the suction nozzle off the unit and while holding the black knob attached to the end of the rod tightly with one hand, use your other hand or some long pliers to reach into the suction chamber and secure the wing nut.  Then twist the black knob clockwise to tighten or loosen the nut to the desired tightness.